Dryer Vent and Pellet Vent Cleaning Rod. Our thinnest, most flexible rod for 3" and 4" vents with elbows, offsets, etc. The unique design pushes the button down for you, see video. Use with full filament or propeller brushes or the new Missile Whip. Small version ButtonLok connectors. Price is per rod, order quantity needed for your use. 3 feet long.
This nylon material is workable down to 10 degrees F. For colder climates use our 5163S Slick rods. Made by us in the USA. See video below to see how easily our patented ButtonLok fittings click together, first and still best on the market and the only USA produced rods.!
HOT TIP: When using do NOT stroke back and forth simply advance the drill and rods pushing the brush (or if heavy build up the clog buster whip, our 2730V) forward into the vent. Add a rod and only move forward again and repeat until the other end of vent is reached. Ideally pop out to "free air" beyond the termination. Those who state "I have to stroke back and forth to bring back the loosened lint" are not using enough vacuum to evacuate the loosened lint (ROVAC recommended from laundry room side). Or, if they are using the blow of the dryer (or better yet a leaf blower), they are getting a lesson in why the vacuum method is often better. In such cases, minimal air flow to move the lint cannot be easily achieved. The solution then is to use the clog buster to drill through the lint piles to get air flow for the evacuation of loosened lint. The use of the blue PS4 brush after the clog buster will remove the last traces of lint.
